Home › Running guides

Injuries & recovery

Blisters From Running: Prevention and Treatment

Blisters from running: why they form, how to prevent them with the right shoes, socks and lubricant, and how to treat them safely.

On this page
  1. Why blisters form
  2. How to prevent them
  3. When you feel a hot spot
  4. Treating a blister
  5. If a blister is large or painful
  6. If it pops by itself
  7. Signs of infection
  8. Can you keep running?
  9. Choosing the right shoes and socks
  10. Long runs, races and wet weather
  11. Common mistakes
  12. When to see a doctor
  13. Happy feet, happy runs
  14. Frequently asked questions
Quick answer

Running blisters form when friction, heat and moisture rub the outer layer of skin until fluid collects underneath. The best prevention is well-fitting shoes, snug moisture-wicking socks, dry feet and a bit of lubricant or tape on hot spots. If you do get one, keep it clean, protect it with a padded dressing, avoid popping it if you can, and rest the area until it heals. Seek medical advice if it looks infected or you have diabetes or poor circulation.

Why blisters form

  • Shoes that don't fit. Too tight, too loose or the wrong shape for your foot.
  • Wet or sweaty feet. Moisture makes skin more fragile and friction stronger.
  • Cotton or seamed socks that bunch and rub.
  • Heat. Hot conditions and long runs increase friction.
  • New shoes or sudden distance. Skin hasn't adapted.
  • Downhills. Your foot slides forward repeatedly.

How to prevent them

StepHow it helps
Fit shoes properlyA thumb's width in front of the longest toe; secure heel; room across the forefoot
Choose good socksSnug, seamless, moisture-wicking; try double-layer socks
LubricateAnti-chafe balm on hot spots such as heels and toes
TapeAthletic tape or blister patches over known problem areas
Keep feet dryFoot powder; change socks after wet runs
Break shoes inWear new shoes for short runs first
Lace wellHeel-lock lacing reduces slipping
Trim nailsShort, straight nails reduce toe friction

When you feel a hot spot

A hot, tender spot is the warning sign. Stop and address it if you can: re-lace, smooth out the sock or apply tape or a blister patch. Dealing with a hot spot early often stops a blister from forming.

Treating a blister

  1. Wash your hands and the area gently with soap and water.
  2. Leave an intact blister alone. The skin acts as a natural sterile cover.
  3. Cover and cushion. Use a hydrocolloid blister plaster or a donut-shaped pad to relieve pressure.
  4. Change shoes and socks to ease pressure while it heals.
  5. Keep it clean and dry. Change dressings when they get wet or dirty.

If a blister is large or painful

If a blister is so large or painful that you can't walk comfortably, it can be drained, but it must be done carefully. Clean the area, sterilise a needle with alcohol, pierce the edge, gently press out the fluid, leave the skin roof in place and cover with a dressing. If you are unsure, see a pharmacist, nurse or doctor.

If it pops by itself

Wash the area with mild soap and water, smooth the flap of skin back down if it's clean, apply antiseptic ointment and cover with a nonstick dressing. Keep it protected until new skin forms.

Signs of infection

Seek medical advice if you see spreading redness, warmth, increasing pain, pus, red streaks or fever. People with diabetes, nerve damage or poor circulation should get any foot wound checked early.

Can you keep running?

A small covered blister that is not painful can sometimes be managed with a protective dressing and a shorter run. If it hurts or changes your stride, take a few days off or cross-train. Altering your gait can lead to other injuries.

Choosing the right shoes and socks

Visit a running store later in the day and wear the socks you plan to run in. Jog a few steps, and check that your heel stays put and toes have room. Many runners find that a half size up reduces both blisters and black toenails. Double-layer socks move friction between layers instead of onto your skin, and wool blends handle moisture well. Replace worn socks as well as worn shoes, since thin patches create hot spots.

Long runs, races and wet weather

Blisters are most likely on long runs and in wet conditions. Before a half marathon or marathon, apply lubricant to heels, toes and arches, and consider taping known trouble spots. Bring a spare pair of socks for very wet days or ultras. Practice with exactly what you plan to wear on race day.

Common mistakes

  • Wearing cotton socks for long runs.
  • Racing in brand-new shoes.
  • Ignoring hot spots.
  • Popping blisters with unclean tools.
  • Running on a painful blister for days.

When to see a doctor

If you have a health condition, have been inactive for a long time or feel unsure, check with your doctor before changing your training. Stop and get medical help promptly if you have chest pain, unusual breathlessness, dizziness or fainting. Pain that is sharp, gets worse as you run, makes you limp or lasts more than a few days is a reason to rest and get it assessed.

Happy feet, happy runs

Good shoes, socks and quick attention to hot spots prevent most blisters. If you'd like a plan that raises your mileage gradually and adapts after every run, Flux Run can create it for you.

Frequently asked questions

What causes running blisters?

Friction, heat and moisture, usually from ill-fitting shoes, poor socks or sweaty feet.

Should I pop a blister?

Usually no. Leave it intact and protect it. If it must be drained, use clean technique or see a professional.

What socks are best?

Snug, seamless, moisture-wicking socks, often synthetic or merino.

How long do blisters take to heal?

Typically several days to a week or two, depending on size and care.

Get this as a personal plan

Flux Run builds a weekly plan for your goal, tracks every run and adjusts after each one. Free on iPhone and Android.

Related guides

Free training plan

Running clubs and races near you